HDPE/PE/PP Pipe High Speed Pipe Extrusion Line in Stock Factory Manufacturer

• Customization: Available
• Warranty: 18months
• Product Type: PE Pipe
• Model NO.: SJ-90/33
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008
• Customized: Customized
• Condition: New
• After-sales Service: Supply
• Supply: Engineers Available to Service Machine
• Suitable Material: HDPE/PPR/PP
• Cooling Way: Water Cooling
• Motor Drive: Inovance Servo
• Key Selling Points: High Productivity
• Contactor: Siemens
• Machine Installation: Available
• Delivery Time: 1 Week -30days
• Speed: 30m/Min
• Power: 75kw
• Control System: Siemens PLC Control System
• Diameter of Pipe: 20-110mm
• Engine: Siemens
• Transport Package: Standard Transport
• Specification: Standard
• Trademark: TRUSTY
• Origin: Qingdao, China
• HS Code: 84772090
• Production Capacity: 250-300kg/H

Product Description

             HDPE/PE/PP Pipe High Speed Pipe Extrusion Line In Stock Factory Manufacturer

Characteristics

· Capacity: single screw extruder, suitable to process PE resin with high capacity;

· Adopts reasonable design, absorbing safe producing technology, acquiring CE & ISO certificate.

 

1.Reliable Gnord gear box 

2.Bi-metallic screw and barrel

3.Inovance Servo
4.Walthmac Gravimetric

5. air cooling for mould

6. water temperature control automatically

7.water level control automatically

8.Reliable rubber block puller

9.Reliable cutter controlled by PLC

10.Siemens brand motor and electrical part
11.Pipe Range:20-110mm
12.In Stock

 

  

 

  

 

Extruder
Single-screw extruder is equipped with gravimetric system, automatic feeder and vacuum dryer and controlled by SIEMENS PLC control system. 

 

Mould
1.Pipe diameter: 20mm-110mm
2.Sizing unit:20mm,25mm,32mm,40mm,50mm,63mm,
75mm,90mm,110mm
3.Sizing unit material: Copper alloy steel

 

Vacuum spray water tank
The vacuum calibration tank is advanced in design, it has the advantages of high output, good plasticizing,low energy-consumption and environmental-friendly.

 

Spray water tank
1.Tank effective length: 9 m*2
2.Tank Raw material: #304 stainless steel 
3.with7.5KW Water Pump*2

 

Hual off
The haul-off machine has different claw number, we have two claws. three claws and so on, it depends on the diameter of the pipes.

 

Cutter
The cutting machine has different types, such as planetary cutter, knife-lifting cutter and no-dust cutter, etc. This unit is reliable and has high production efficiency.The cutting machine selected from stock is as shown in the picture

 

Machine Introduction

HDPE series plastic pipe production line is mainly used for producing pipe of waster supply and drainage in the field of agriculture and construction etc. This machine consists of extruder, mould, vacuum calibration tank, haul off unit. Cutting unit, stacker etc. The single screw extruder and haul off unit apply famous A/C frequency conversion speed regulation device, both vacuum pump and water pump apply famous brand. The haul-off unit includes two-claw type, three-claw type, four-claw type, six claw type,eight-claw type, ten-claw type,
twelve-claw type etc. Dust free cutting machine, saw blade cutting machine or planetary cutting machine can be applied, the property of machine group is reliable. The production efficiency is high with special device. It can also produce PP, PE, ABS, PPR, PEX, Silicon core pipe etc. The planetary cutting machine is controlled automatically with computer, it has such advantages of simple operation, reliable
performance etc. It has reached international advanced level.

 

Model	Extruder	Pipe Range (mm)	Capacity (kg/hr)	Main Motor Power (kw)	Total Power (kw)	Line Length (m)
TPM -63	SJ65/33	16-63	120-180	45	110	28
TPM -110	SJ65/33	16-110	150-200	55	130	28
TPM -160	SJ75/33	150-160	180-220	75	150	30
TPM -250	SJ75/33	75-250	280-350	90	280	30
TPM -315	SJ90/33	110-315	300-400	132	350	36
TPM -450	SJ90/33	160-450	350-450	160	400	42
TPM -630	SJ120/33	315-630	550-850	200	550	45
TPM -800	SJ150/33	450-800	800-1200	250	650	45
TPM -1200	SJ120/33 90/33	710-1200	1000-1500	285	800	48
TPM -1600	SJ120/33 120/33	800-1600	2000-3000	500	1200	48

 

Product application

PE pipe extrusion line application description: This Extrusion Line can be used for different diameter PE Pipe production which have excellent stiffness and flexibility, heat resistance, aging resistance, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage, and so on. So, this pipe production line is a preferred for duct work system of gas, water pipe and agricultural irrigation pipe between city and village.

Company Profile:

Package & Transportation:

FAQ

Q1: Your company is a trading company or a machine manufacturer?

A1:Our company is a plastic machinery manufacturer which is engaged into this trade more than 15 years.As a manufacturer,we could supply our machine,service,technical support and maintenance directly and it's more convenient.

Q2: How to get an accurate offer?
A2: Because our offer and technical specification is associated with your final product and requested capacity,we will choose the right model of extruder and mould after understanding all the information,then we could supply our plan.We could fully exchange information by Email, whatsapp or wechat.

Q3: Where is your factory and which port is the nearest to your factory?
A3: My factory is in Qingdao city, Shandong Province and the nearest seaport is Qingdao port.

Q4: How long is the delivery time?
A4: Generally it will take 30-45 days.

Q5: Could you send your engineers to our factory?
A5: Yes,we will send our engineers to your factory for installation,commissioning and training after machines arrive at your factory.In addition,if you need our engineers available in the future,we also could send our engineers.

If you have any questions, please do not hesitate to contact us. We Look forward to listening to you!

Pre-sale
We provide presales service in various forms, for example, making investment budget, manufacturing planning, etc. so that customers make a reasonable plan with less cost.
Investment budgeting---We provide services of product profit analysis, recommendation of machine and auxiliary equipment and relevant budgeting, human resources allocation and budgeting.
Plant Planning---We provide the mounting dimension of the equipment base, design of equipment layout, workshop ventilation, water transmission etc.

On-sale
Detailed design of workshop lay-out
Technological information of provided products
Schedule about design, manufacture and installation
Working & Producing process
Training courses for the technician team so that the installation is safe and standard

After-sale
For customers buying our products, we provide them training so that they can use and maintain the machine independently.
We will offer to customers technical support in time. If needed, we will offer on-line guidance and assistance.
We can provide free technical guidance if customers need new equipment, add or rebuild equipment.
We will prioritize the product upgrading of previous customers.