PP Plastic Hollow Building Template Extrusion Machine

Product Description

1. Product Introduction

PP Plastic Hollow Building Formwork Construction Template Production Line  
 
The PP building templates extrusion production line is successfully developed by our company to absorb and digest foreign advanced extrusion technology and independent innovation. The plate thickness range can be made to 8-18mm, and the plate width can be customized according to customer's requirements of 600mm-915mm-1220mm. Its production surface is smooth and clean, Small size error, with nail, planing, corrosion resistance, flame retardant and many other advantages.

2. Application

PP new hollow building formwork production line This unit has a single screw extruder consisting of hydraulic screen changer, mold, primary traction machine, annealing furnace, cooling section, secondary traction machine, cross cutting machine and conveyor. In the industry, the initial O-shaped hollow structure was changed to the m-shaped, V-shaped, N-shaped, and well-shaped type, and finally changed to a grid type. The grid-shaped structure is accepted by the market in terms of material usage and structural properties. The surface of the produced product is smooth and has small dimensional error, and has many advantages such as nailing, planing, corrosion resistance and flame retardancy.

3.Advantages

1. Good water resistance. Even if it is completely immersed in water for many days, it will not be deformed by moisture. It is resistant to acid and alkali, corrosion-resistant, and will not rot and rust. It is especially suitable for use in wet environments such as basement engineering, road railways and bridge piers.
2. It is not compatible with cement, it is easy to demould after construction, and the page will not be deformed by cement adhesion.
3, the plastic template surface is smooth, smooth, no need to apply mold release agent, reducing cleaning and maintenance costs. The surface of the building with which it is constructed is smooth and flat, and no secondary modification is necessary.
4. Light weight, high efficiency, convenient support, low labor intensity and high construction efficiency.
5, the support strength is high, not easy to deform, but impact, and wear.
6, low cost. Long service life, the number of turnovers can reach more than 100 times. The used scrap plates and scraps can be recycled and reused, saving costs and reducing pollution. The combined use cost can save more than 30% compared with traditional wood formwork.
7, long life, repeated use times. The final damaged plastic formwork can still be crushed again, re-processed into a new formwork, saving resources and meeting the requirements of "green industry".
8, good insulation, is conducive to shorten the construction period.
9. Various methods can be used for the home wood method, and welding can also be carried out, so the secondary processing can be flexibly performed at the construction site.
10, plastic template can be processed, can be planed, sawable, nailable, can be used together with wood formwork
11. The process is saved and the construction efficiency is improved. The two surfaces (smooth surface or tread surface) of the PP hollow plastic building template have different use effects. If the surface of the carcass is smooth and smooth after the concrete is poured by using the smooth surface, the surface of the carcass is clean and smooth, and the requirements of the decorative surface and the decorative water are not required. The second time is used, the material is saved, the cleaning and maintenance costs are reduced, and the quality of the concrete after molding is reduced. Stable and save time. If a tread is used, it is advantageous to combine with the plaster layer. In particular, the first two piers are achieved by using a tread surface.


4.Main technical parameter 
 

Extruder model	SJ-120/33	SJ-150/33	SJ-120/33 & SJ-65/33	SJ-150/33&SJ-65/33
(L/D)	33:1	33:1	33:1	33:1
Products width (mm)	915-1220	915-1220	915-1220	915-1220
Products thickness(mm)	14-16	14-16	14-16	14-16
Main motor power (kw)	110	160	37-132	37-160
Daily output(pieces)	550	700	600-800	800-1000

 

5.Company Profile
 

Qingdao Trusty Plastic Machinery Co., Ltd. is a professional plastic extrusion equipment manufacturer integrating design, research and development, production and sales.
The company's main products are rich, the production technology is mature, and the after-sales service is guaranteed. Products are sold at home and abroad, such as: Brazil, Chile, Mexico, the Philippines, Italy, Russia, Pakistan, Vietnam, India, Algeria, Egypt and other countries.

Our company is located in Qingdao, one of the plastic machinery bases in China, where the railway, sea transportation, aviation and other transportation systems are very complete. And it is one of the regions with rapid economic development in the coastal cities.The advantaged geographical conditions have provided great convenience for the development of the company's trade.

Our company's main products are: PVC door and window profile production line, WPC wood-plastic profile production line, PVC wall panel production line, PVC/PE/PPR pipe production line, PVC/WPC crust foam board production line, PE/PP/PC hollow sheet production line, PVC roof tile production line and PET packing belt production line, etc. According to customers' needs, to achieve diversified processing customization.

Over the years, the company has always adhered to the tenet of "honesty for basis, quality for living, innovation as the theme, and development as the focus", abide by the quality commitment to users, and won the trust of customers.


FAQ
1.WHY CHOOSE US
We are the Professional manufacturer to develop the plastic extrusion machines in Qingdao. Machine quality and customer satisfaction is our pursuit.Be sure we have the strength to provide you with quality machines and perfect service.
2.WHAT SERVICES DO WE OFFER?
Pre-sale communication → Design proposal, signature confirmation→
Customized production→ Test machine before shipment →Package &
delivery→ Engineer installation→Training operator → Technical support
3.PAYMENT TERMS:
30% of total amount should be paid by T/T as down payment ,the balance (70% of total amount) should be paid before delivery by T/T or irrevocable L/C by payment(at sight).
4.DELIVERY CONDITIONS:
4.1 Delivery condition: FOB Qingdao port or CIF destination Port.
4.2 Delivery terms: Within 30-60 working days after receipt of advanced payment, the seller should inform the buyer to do inspection,the seller should finish packing of goods and ready for shipment within 15 working days after the seller receipt the full payment.
5.WARRANTY TERMS
5.1 Warranty period: 12 months, starting from the machine receipt in customer's warehouse
5.2 Seller shall grant: services and spare parts, free-of-charge service throughout the entire equipment during warranty period.
5.3 long life service: the seller should provide long life service for the sold goods, the buyer pay for needed spare parts after the 12months warranty terms.
6.INSPECTION
When the machine finished, the seller should inform the buyer to do inspection before shipment, the seller guaranty good performance of all the sold goods.the seller undertake the material cost for the machine inspection in seller's factory. the buyer should come to seller's factory to do the inspection work, or the buyer could entrust any third party to come to seller's factory to do the inspection work.
7.INSTALLATION AND EQUIPMENT COMMISSIONING: 
if the buyer requires, the seller should send technician team to buyer's factory for installation and testing the whole line, and the buyer should undertake the whole food/place and round tickets (airplane, food, hotel, and so on), and pay salary to engineer for 100 usd/day/engineer.