Customization: | Available |
---|---|
After-sales Service: | Provide |
Warranty: | 12months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Screw Diameter |
120mm |
Ratio of the Screw |
35:1 |
Barrel: |
38CrMoAIA, under the nit riding treatment and water-cooling compulsive feeding section |
Screw: |
38CrMoAIA, under the nit riding treatment |
Nit riding depth on screw |
0.4-0.6mm, hardness: HV>740 |
Nit riding depth on barrel |
0.5-0.7mm, hardness: HV>940 |
Barrel heating |
8 sections heating, cast aluminum heating ring, heating power: 6kw*8 zones Heated covered with stainless steel protection cover |
Barrel cooling |
Fan cooling, fan power: 0.25kw*7 sets |
Reduction box |
Hard tooth reducer, material of gear is 20CrMoTi, |
Driving power |
165kw motor, frequency control by ABB inverter |
Production output | 350-400kg/h |
Three roller calender
1. Roller barrel: φ400*1750mm;
2. The three-roller rack is vertical type, steel plate welding structure;
3. The three-roller system is driven by three bevel wheel hard tooth gear reducer;
4. Spacing adjustment structure of the three rollers are Worm gear reducer;
5. Roller temperature controlling system is equipped with
temperature controller.
Cooling bracket
1. Length: 6/9m,
2. Material is stainless steel tube, after polishing
3. Equipped with protective film coating device and side edge
cutting device, pneumatic cutting
4. Online edge cutting devices: two knives
5. Crusher to recycle the cutting edge wastage online.
Hual off
1. Hauling machine adopts rubber-roller cylinder to realize clamping.
2. Rubber roller size is φ250*1750mm.
3. Power of hauling off device: 2.9kw motor
4. Pulse counting metering: high precision rotary encoder
Cutter
Cutting width: According to model
Cutting mode: equipped with clamping hold-down device
Metering mode: fixed length metering device, with accurate and stable counting
Shearing: long time continuous cutting, the minimum cutting length is >500mm.
Accuracy: length error <=1mm, diagonal error is less than 3mm.
Board width
|
500-2000mm
|
Board thickness
|
3-30mm
|
Max. extrusion capacity
|
350-800kg/h
|
Production line speed
|
15m/min
|
Processing Type
|
Extruding Machine
|
Location | Indoors |
Power Supply | No dangerous area |
Humidity | ≤95% |
Temperature | 0-40ºC |
Power | 3-phase, 380V, 50Hz |
Total Installed Power | 150KVA(Depends on machine model) |
Cooling Water | ≤25ºC ≥0.3MPa, outdoor water tank: 15-20m³, water circulated with production line |
Compressed air | 0.3 m³ /min, >0.5MPa, Equipped with 4-5.5kw air compressor |
Production Line Dimension | 20m*3m*3.5m |