WPC Fence Plastic Lumber for Decking/Fences/OutdoorLandscape
1. PRODUCTION INTRODUCTION
Wood-plastic products is as a substitute for traditional wood products, greatly reduce the demand for wood. According to the demand, machine specially designed the calibration forming technology for PVC wood plastic foam, low foam / no foam and cold push solution for PE/PP wood plastic. To pursue a longer using life of wood products, the surface of WPC products with a protective layer through co-extrusion technology comes into being. In addition, we are devote to the provision of the turn-key solution,including upstream machine, such as wood crusher, miller and drying equipment, WPC composite mixing & miller system, and downstream, such as embossing, brushing, sanding, lamination, hot stamping transfer, printing, Waste crushing, grinding and recycling equipment for different wide products.
Feature:
1.High quality; unique design; excellent manufacture;
2.Reasonable feeding technology; feed plastic and wood power(after treated) separately and
correctly with avoid layering phenomenon and mass defect, because of different ratio of plastic
and wood power.
3. High efficiency: Good mixing and plastering effect, fine liquidity and quickly, high efficiency.
4. Low efficiency consumption: no need of drying granulation obviously can save energy.
2.Technical Parameter
| Plastic material |
recyccled PP/PE plastic |
| Wood material |
wood powder from rice husk/straw,wheat husk/straw,wood sawdust,wastage wood |
| Percentage of plastic |
25-30% |
| Percentage of wood powder |
50-70% |
| Final product |
WPC decking, WPC wall cladding, WPC pergola profile,WPC post, WPC fence profile, and other WPC construction profiles |
| Production process |
raw material--mixing--granulation--extrusion and molding--surface treatment |
Main Configuration
Extruder
•World famous brand electrical component: Siemens,neider, ABB etc;
• High torque gearbox with adopts NSK/bearing;
• Siemens/WEG original motor achieved global after service;
• Bimetallic screw and barrel;
• Intelligent PLC controlling system with human-friendly interface.
|
|
Mould
• 3Cr13/3Cr17 material
• Complete set include extrusion die head, calibrator and cooling tank
• Adopt to single, co-extrusion, foam imitation marble profile
|
|
Vacuum Calibration Table
• Include full set of vacuum and water pump
• Width: 240mm
• Length: 6000mm
• Independent operation panel for easy operation
|
|
Haul off
driven separately and speed control by inverter
• Fast change type pads for easy operation
• Install plate is adopts aluminum material
|
|
Cutter
• Lifting saw cutter with adopts double station dust collection system
•Synchronous drivingby air cylinder or servo motor control
|
|
Stacker
• Stainless steel304 as touching material
• Discharge driving by air cylinder
|
|
3. PE WPC Products Application
The PE WPC profile extrusion line is suitable for producing the hollow/solid PE WPC profiles. This profile has the advantage of fireproof, waterproof, moisture proof, moth proof, mildew proof and environment friendly. It is mainly used for extruding outdoor decorative WPC profiles, such as gardening landscapes, outdoor landscapes, pallets etc.
This extrusion line is for producing co-extrusion PP/PE WPC decking. The decking surface can be made into wood grain by co-extruder. Further more, the machine can be equipped with on-line embossing device the surface can be made into 3D wood grain. The WPC decking has a series of advantage including water-proof, insect prevention, ageing resistant, easy installation, environment friendly and good weathering resistance.
4. Company Profile
Qingdao Trusty Plastic Machinery Co., Ltd. is a professional plastic extrusion equipment manufacturer integrating design, research and development, production and sales.
Our company's main products are: PVC door and window profile production line, WPC wood-plastic profile production line, PVC wall panel production line, PVC/PE/PPR pipe production line, PVC/WPC crust foam board production line, PE/PP/PC hollow sheet production line, PVC roof tile production line and PET packing belt production line, etc. According to customers' needs, to achieve diversified processing customization.
5. After Sales Service
(1)After the machines are finished, the seller will test all machines before shipment. If the buyer can not come to test the machine, we will test the machines and send the sample to buyer.
(2)After shipment, the seller will send one or two technicians to the buyer' s factory to help the buyer install the machine and train workers for buyer.
(3)We will supply all electricity drawing, machine installation drawing.
(4)When make shipment, we will put some spare electricity parts for free, like the barrel hearers, thermcouples, breakers, relays, and other items which is easier broken.
6. FAQ
1.WHY CHOOSE US
We are the Professional manufacturer to develop the plastic extrusion machines in Qingdao. Machine quality and customer satisfaction is our pursuit.Be sure we have the strength to provide you with quality machines and perfect service.
2.WHAT SERVICES DO WE OFFER?
Pre-sale communication → Design proposal, signature confirmation→
Customized production→ Test machine before shipment →Package &
delivery→ Engineer installation→Training operator → Technical support
3.PAYMENT TERMS:
30% of total amount should be paid by T/T as down payment ,the balance (70% of total amount) should be paid before delivery by T/T or irrevocable L/C by payment(at sight).
4.DELIVERY CONDITIONS:
4.1 Delivery condition: FOB Qingdao port or CIF destination Port.
4.2 Delivery terms: Within 30-60 working days after receipt of advanced payment, the seller should inform the buyer to do inspection,the seller should finish packing of goods and ready for shipment within 15 working days after the seller receipt the full payment.
5.WARRANTY TERMS
5.1 Warranty period: 12 months, starting from the machine receipt in customer's warehouse
5.2 Seller shall grant: services and spare parts, free-of-charge service throughout the entire equipment during warranty period.
5.3 long life service: the seller should provide long life service for the sold goods, the buyer pay for needed spare parts after the 12months warranty terms.
6.INSPECTION
When the machine finished, the seller should inform the buyer to do inspection before shipment, the seller guaranty good performance of all the sold goods.the seller undertake the material cost for the machine inspection in seller's factory. the buyer should come to seller's factory to do the inspection work, or the buyer could entrust any third party to come to seller's factory to do the inspection work.
7.INSTALLATION AND EQUIPMENT COMMISSIONING:
if the buyer requires, the seller should send technician team to buyer's factory for installation and testing the whole line, and the buyer should undertake the whole food/place and round tickets (airplane, food, hotel, and so on), and pay salary to engineer for 100 usd/day/engineer.
Audited Supplier 
){kind=link}